Migration and Import

Migration from another CA to EJBCA includes of the following steps:

Migration of KCAs ́ Signing Keys

PKCS#11 Configure PKCS#11 for nCipher

For nCipher, the slot number is some virtual slot, where we do not know the name of it. Fortunately, one can use the default slot by simply omitting to give the slot number. In order to use nCipher PKCS#11, one has to set up some parameters.

Create file /opt/nfast/cknfastrc with this content:

CKNFAST_LOADSHARING=1
CKNFAST_NO_ACCELERATOR_SLOTS=1
CKNFAST_NO_UNWRAP=1
CKNFAST_OVERRIDE_SECURITY_ASSURANCES=import

Signature Keys

When KCA is installed, it generates keys on nCipher HSM. Those keys are in "native" format and can only be used by KCA. There is no public key associated on the HSM. We start by listing some general information about the HSM:

C:\nfast\bin>enquiry
Server:
enquiry reply flags none
enquiry reply level Six
serial number B1BB-0EE9-3511
mode operational
version 2.23.6
speed index 440
rec. queue 422..622
level one flags Hardware HasTokens
version string 2.23.6cam6, 2.22.43cam8 built on Oct 13 2006
16:16:12
checked in 00000000431dca98 Tue Sep 06 18:58:00 2005
level two flags none
max. write size 8192
level three flags KeyStorage
level four flags OrderlyClearUnit HasRTC HasNVRAM HasNSOPermsCmd
ServerHasPollCmds FastPollSlotList HasSEE HasKLF HasShareACL
HasFeatureEnable Ha sFileOp HasPCIPush HasKernelInterface HasLongJobs
ServerHasLongJobs AESModuleKeys NTokenCmds LongJobsPreferred
module type code 0
product name nFast server
device name
EnquirySix version 4
impath kx groups
feature ctrl flags none
features enabled none
version serial 0
Module #1:
enquiry reply flags none
enquiry reply level Six
serial number B1BB-0EE9-3511
mode operational
version 2.22.43
speed index 440
rec. queue 19..152
level one flags Hardware HasTokens
version string 2.22.43cam8 built on Oct 13 2006 16:16:12
checked in 00000000452f6a4d Fri Oct 13 12:28:29 2006
level two flags none
max. write size 8192
level three flags KeyStorage
level four flags OrderlyClearUnit HasRTC HasNVRAM HasNSOPermsCmd
ServerHasPollCmds FastPollSlotList HasSEE HasKLF HasShareACL
HasFeatureEnable Ha sFileOp HasPCIPush HasKernelInterface HasLongJobs
ServerHasLongJobs AESModuleKeys NTokenCmds LongJobsPreferred
module type code 7
product name nC1003P/nC3023P
device name #1 PCI bus 7 slot 1
EnquirySix version 5
impath kx groups DHPrime1024
feature ctrl flags LongTerm
features enabled StandardKM
version serial 24
rec. LongJobs queue 18
SEE machine type PowerPCSXF
C:\nfast\bin>nfkminfo.exe
World
generation 2
state 0x17270000 Initialised Usable Recovery !PINRecovery
!ExistingClient RTC NVRAM FTO SEEDebug
n_modules 1
hknso 057731d6c635560900003fed89eba88c5082f2a1
hkm b08e66b01777fcf34dceb77c0684c8d1a071144e (type DES3)
hkmwk 1d572201be533ebc89f30fdd8f3fac6ca3395bf0
hkre b0f5dbebedc703c6acd7685b261f6748bc4a9535
hkra 7368a945efc76505a19092c5115f493716de3172
hkmc 1d1e3fb769837be06e028bc038d1789ced2ac9e1
hkrtc 55f17755cae9ae49a588f154260306deeae1f5cc
hknv 82674f0623407fbaac5a3aaa0fc08346dff34f37
hkdsee 6df83c268c25939c307f61245235a2ac44e487ae
hkfto cae32a48bd1b9e68e606ae723f8dcb93eb4ee9ab
hkmnull 1d572201be533ebc89f30fdd8f3fac6ca3395bf0
ex.client none
k-out-of-n 1/1
other quora m=1 r=1 nv=1 rtc=1 dsee=1 fto=1
createtime 2007-07-16 14:58:41
nso timeout 10 min
 
Module #1
generation 2
state 0x2 Usable
flags 0x0 !ShareTarget
n_slots 2
esn B1BB-0EE9-3511
hkml 5e43facc6aa39068092762d80a1954bded193b4b
Module #1 Slot #0 IC 25
generation 1
phystype SmartCard
slotlistflags 0x2 SupportsAuthentication
state 0x5 Operator
flags 0x10000 Passphrase
shareno 1
shares LTU(PIN)
error OK
Cardset
name ”oper”
k-out-of-n 1/1
flags NotPersistent PINRecoveryForbidden(disabled) !RemoteEnabled
timeout none
card names ””
hkltu 3126f2b3cf7d9d53e3ba278a081ef471644298f8
gentime 2007-07-16 15:00:07
Module #1 Slot #1 IC 0
generation 1
phystype SoftToken
slotlistflags 0x0
state 0x2 Empty
flags 0x0
shareno 0
shares
error OK
No Cardset
No Pre-Loaded Objects

To view keys used, run the following command:

C:\nfast\bin>nfkminfo -k
Key list - 19 keys
AppName rsa-keon-ca-65 Ident 1184599865281000
AppName rsa-keon-ca-65 Ident 1184599867765000
AppName rsa-keon-ca-65 Ident 1184599888484000
AppName rsa-keon-ca-65 Ident 11845998900
AppName rsa-keon-ca-65 Ident 1184599947937000
AppName rsa-keon-ca-65 Ident 1184599969937000
AppName rsa-keon-ca-65 Ident 1184599971843000
AppName rsa-keon-ca-65 Ident 1184599974609000
AppName rsa-keon-ca-65 Ident 1184599977718000
AppName rsa-keon-ca-65 Ident 1184599980515000
AppName rsa-keon-ca-65 Ident 1184599982765000
AppName rsa-keon-ca-65 Ident 1184599985656000
AppName rsa-keon-ca-65 Ident 1184599987625000
AppName rsa-keon-ca-65 Ident 1184599989140000
AppName rsa-keon-ca-65 Ident 1184599991234000
AppName rsa-keon-ca-65 Ident 1184600151640000
AppName rsa-keon-ca-65 Ident 1184600153609000
AppName rsa-keon-ca-65 Ident 1184659106609000
AppName rsa-keon-ca-65 Ident 1184659187875000

There are quite some keys, and we can ́t immediately say which one is the CA ́s signing key. This is deduced according to the following example:

C:\nfast\bin>pubkey-find.exe c:\kca.pem
input format cert
nCore hash d0196ea2e070315e9e162c28dcdc5a524bf6380d
unnamed
appname rsa-keon-ca-65
ident 1184659106609000

After which we can add the corresponding public key:

C:\nfast\bin>pubkey-find.exe --augment c:\kca.pem

Next, ”move” the key as to be usable by PKCS#11:

C:\nfast\bin>generatekey --retarget –no-verify pkcs11
13:40:30 WARNING: nfgk_debug_output is now deprecated (see manual).
from-application: Source application? (jcecsp, pkcs11, rsa-keon-ca-65)
[default jcecsp] > rsa-keon-ca-65
from-ident: Source key identifier? (1184599865281000, 1184599867765000,
1184599888484000, 11845998900,
1184599947937000, 1184599969937000,
1184599971843000, 1184599974609000,
1184599977718000, 1184599980515000,
1184599982765000, 1184599985656000,
1184599987625000, 1184599989140000,
1184599991234000, 1184600151640000,
1184600153609000, 1184659106609000,
1184659187875000) [1184599865281000]
> 1184659106609000
plainname: Key name? [] >
ERROR: plainname: key name unspecified
plainname: Key name? [] > kcaSign
key generation parameters:
operation Operation to perform retarget
application Application pkcs11
slot Slot to read cards from 0
verify Verify security of key no
from-application Source application rsa-keon-ca-65
from-ident Source key identifier 1184659106609000
plainname Key name kcaSign
****************************************************
* WARNING: will not verify the security of the key *
****************************************************
Loading `oper’:
Module 1: 0 cards of 1 read
Module 1 slot 0: `oper’ #1
Module 1 slot 0:- passphrase supplied - reading card
Card reading complete.
Key successfully retargetted.
Path to key: c:\nfast\kmdata\local\key_pkcs11_uc3126f2b3cf7d9d53e3ba278a081
ef471644298f8-628484d430c6c0502fdb1a520fb84b9dc73c8372

To use the public key via PKCS#11, associate a certificate to the key. For this, we take the actual certificate:

C:\nfast\bin>ckcerttool.exe -c oper -f c:\ca\kca.pem -k uc3126f2b3cf7d9d53e3ba27
8a081ef471644298f8-628484d430c6c0502fdb1a520fb84b9dc73c8372 -L kcaSign
Certificate found, processing...
Please enter the passphrase for ”oper” token (No echo set).
Passphrase:
Certificate successfully imported.
Run cklist to view your certificate object.
OK

Next, generate two more keys to be used by EJBCA. One of the keys will be used by EJBCA for internal encryption within EJBCA, and the other for testing of the HSM. This generation should be done as described in the EJBCA User Guide, using the regular EJBCA tools. Generate one RSA key of length 2048 bits with alias kcaDefault and one RSA key of length 1024 with alias kcaTest:

keytool -generate -keystore NONE -storetype PKCS11-NFastJava -storepass foo123
-alias kcaDefault -keyalg RSA -keysize 2048
keytool -generate -keystore NONE -storetype PKCS11-NFastJava -storepass foo123
-alias kcaTest -keyalg RSA -keysize 1024

We use the EJBCA tools to get automatic association between the private key and a (dummy) certificate, so it can be used through the Java PKCS#11 provider.

Importing CA

After doing retarget on the keys for the Root CA and the Sub CA, we can import CA certificates into EJBCA.

KCA does not use the same DN order as EJBCA does by default, so if you want issued certificate to look exactly the same you should uncheck the checkbox Use LDAP DN order in EJBCA after the installation.

Install EJBCA as usual with one AdminCA, after which we can import the CAs from KCA from the help script.

bin/ejbca.sh ca importca TestKCARootCA org.ejbca.core.model.ca.catoken.
PKCS11CAToken foo123 rootca.properties TestKCARootCA.pem

rootca.properties contains:

defaultKey rootDefault
certSignKey rootSign
crlSignKey rootSign
testKey rootTest
pin foo123
sharedLibrary /opt/nfast/toolkits/pkcs11/libcknfast.so

We do the same for the SubCA:

bin/ejbca.sh ca importca TestKCASubCA org.ejbca.core.model.ca.catoken.
PKCS11CAToken foo123 subca.properties TestKCASubCA-chain.pem

subca.properties contains:

defaultKey subDefault
certSignKey subSign
crlSignKey subSign
testKey subTest
pin foo123
sharedLibrary /opt/nfast/toolkits/pkcs11/libcknfast.so

TestKCASubCA-chain.pem is created with:

cat TestKCASubCA.pem TestKCARootCA.pem > TestKCASubCA-chain.pem

After this, EJBCA has one Root CA and one Sub CA that use the same signing keys as KCA.

Importing User Certificates

In EJBCA, the following command imports user certificates:

bin/ejbca.sh ca importcert kca1 foo123 TestKCASubCA ACTIVE user1.pem

The command does not import information about revocation. Full revocation information is possible to implement in a programmatic way.

You can write your own migration tool, speeding up the process by using the command line code as a template. It is found in src/java/org/ejbca/ui/cli/CAImportCertCommand.java.